Scrap metal collection
Black scrap metal
Material thickness over 4 mm, round material = ø 6 mm, maximum dimensions 1500 x 500 x 500 mm. EXCLUDING CLOSED CONTAINERS. 1% of dirt is deducted from the amount of material.
Ferrous scrap from production. Dirt 0%.
Material thickness over 4 mm, round material = ø 6 mm, dimensions 1500 x 500 x 500 mm. EXCLUDING WHOLE GAS CYLINDERS. 2% of dirt is deducted from the amount of material.
Material thickness up to 4 mm. Sheet material, structures, etc are suitable. EXCEPT FOR REFRIGERATORS AND WHOLE GAS CYLINDERS, CYLINDERS. 2% of dirt is deducted from the amount of material.
Vehicle with full equipment
Passenger car containing 1) engine, gearbox, bridges, alternator, starter and battery, and may contain 2) gas unit, engine, gearbox and reverse oils, clutch, brake and cooling fluids, window washer fluid, rubber, brake fluid, window washer fluid, brake fluid, window washer fluid.
Metal shavings, ferrous metal
Maximum dimensions: 1500x500x500 mm
Engines, reducers, gearboxes, etc with steel or cast iron housing. Goods are purchased free of oil. 2% of dirt is deducted from the amount of material.
Non-ferrous scrap metal
Aluminium (mixed) (up to 2% iron)
Aluminium casting without iron
Aluminium wheel rims (iron 0%)
Food aluminum (iron 0%)
Copper scrap (new production scrap) Electrotechnical wire
Copper scrap (mixed material) Used sheet
Stainless turnings (dirt 2%)
Brass (mixed material) Mixed scrap, sanitary ware excluding cartridges, sleeves. The shells of the shower hose must be empty inside. The percentage of chromed parts shall not exceed 20%. The material should be clean without plastic, glass and rubber. Shall not magnetize.
Brass radiators Radiators must be clean from other metal and plastic
Brass turnings Brass turnings must be clean, shall not magnetize. Dirt of up to 2%, moisture of up to 2%. Must be oil-free.
Brass cartridges and cases Cartridges containing iron are not classified under brass cartridges. Whole cartridges are not accepted. Shall not magnetize
Chrome steel Washing machine drums, propellers of ships. Chemical analysis minimum: Cr 10– 20%, Ni 0%.
Zinc Scrap or components. Zinc-coated material is not considered zinc.
Lead Scrap or components (clean, free from dirt and grime). Lead battery details do not fit under the lead category and are accepted as lead-acid batteries.
Lead acid batteries
Bp batteries Accumulators with lead plates. The battery must have a Pb symbol. Batteries, cordless drill batteries, Ni-Li batteries and Ni-Cd batteries do not fit under the lead-acid battery category
Electric engines with copper coils from 0.75 kW, starters and generators. Wires, belt washers and other mechanisms (fan, pump) must be removed from electric engines. The engine must be intact.
We will process your application within one working day and contact you.
Have questions? Contact us
Ph: (+372) 518 1465